The current in coil number “1” runs through the resistor “R” and into the base of the transistor, forcing it to switch on.

The coils set “B” includes 3 independent windings over a single central core and the magnet going past these three coils generates a tiny current inside them. A rotor “C”, made up of 5 magnets is manually moved pushed such that one of the magnets moves close to the coils. The battery designated as “A” energizes the circuit. The first basic circuit diagram can be witnessed below The designs will be understood gradually as we run through the various circuit diagrams and explain how the generator works. Very shortly, the 4 coils had been enhanced to 5 in which the newly added coil had three independent windings. The top opening of these 5 cylindrical drums are secured with plastic rings extracted from the same cylindrical pipes, to ensure that the magnets stay fixed tightly in their respective positions inside cylindrical cavities. The material used for this can be clear acrylic, and the assembly must include 5 sets of 9 magnets fixed inside cylindrical pipe like cavities as shown in the figure. The rotor assembly and mechanism should be extremely accurate with its alignment and ease of rotation, and therefore must be built using precision machines such as a lathe machine. The gap can be anywhere between 1mm to 10 mm.

The shown red arrow tells us regarding the adjustable gap between the rotor and the coils which can be changed by loosening the nut and then moving the coil assembly near or away from the stator magnets for the desired optimized outputs. The initial unit was constructed using 4 coils as the stator and a central rotor having a 5 magnets embedded around its circumference as depicted below: The proposed self-powered generator is designed to work day and night providing continuous electrical output, quite like our solar panel units. The first version discussed here is able to charge three 12 battery's together and also sustain the generator for a permanent perpetual operation (until of course the batteries lose their charging/discharging strength)

The system can be implemented through a few different configurations. When the system is used with an inverter circuit, the output from the generator is around 40 watts. We discuss the details of a few such circuits in this article.Ī free energy enthusiast from South Africa who doesn’t want to reveal his name has generously shared the details of his solid state self-powered generator for all the interested free energy researchers. Who wouldn't like to see a self-powered motor generator running at home and powering the desired appliances non-stop, absolutely free of cost.

Easy power plan generator